Home → Blog
Stability and tightness of damaged flange joints with DeltaV-Seal Gaskets
Imperfections on flange faces happen. With more and more companies adopting low emissions business practices, can damaged flange surfaces provide a suitable seal to meet environmental compliance?…
PIPEOTECH Enters Strategic Partnership with US-Based Company
PIPEOTECH is entering a partnership agreement with ADV Integrity, Inc., a highly skilled and recognized engineering consulting and business strategy firm headquartered in Houston, Texas. This…
Amended Technical Instructions on Air Quality Control (TA Luft) – What does it mean for Pipeotech and our customers?
The Technical Instructions on Air Quality Control (TA-Luft), which have been revised in 2021, are a comprehensive instrument for German authorities to control air pollution.
The importance of sealing materials in safe and efficient integrated fertilizer production
The need to optimize fertilizer plant operations, driven by a range of external and internal influences, means that plant operators must be confident that all equipment is both reliable and high…
The impact of using DeltaV-Seal™ on flange surfaces
Pipeotech has conducted flange surface profile measurements in cooperation with Sintef/DNV to investigate the impact of DeltaV-Seal on flange surfaces in bolted flange joints (BFJ).
Pipeotech, featured in Fluid Handing Pro
Vibration Analysis Part of the DNV GL Type Approval for the Pipeotech DeltaV-Seal The weakest link in industrial piping systems is the gasket. Conventional semi-metallic gasket technologies are not…
Pipeotech’s agent SKPS to exhibit at ADIPEC
Hall 8 on Stand 810, 15-18 November 2021 SKPS is looking forward to showcasing Pipeotech DeltaV-Seal™ at ADIPEC 2021. DeltaV-Seal is the tightest, safest, and most durable flange gasket on the…
Corporate environmental responsibility ‘done right’ with long-term methane mitigation by design
Methane is one of the most potent greenhouse gases and avoiding leakage is a priority when using methane systems. Methane also ignites easily, so there are clear and immediate HSE incentives for…
ATEX zoning unnecessary with DeltaV-Seal™
During final assembly in the factory, cars are filled with fuel before being transported to their final destination. To facilitate this, fuel lines run throughout the facility. However, along the…
DeltaV-Seal™ stops flammable leakage, prevent fires
In facilities that use hot oil heat transfer fluid systems, fire hazards are a significant challenge due to the combination of organic combustible liquids, which run at temperatures above their flash…
DeltaV-Seal™ prevent fires, promote safe environment
The use of hot oil systems in manufacturing presents challenges when traditional gaskets breakdown and cause leakage. As liquids in the system are kept at a temperature above their flash point, when…
DeltaV-Seal™ prevents leaks and pipe corrosion
In district heating and cooling, generic spiral wound gaskets frequently cannot cope with the cyclical temperature conditions and often fail, leading to leakages and corrosion of the pipeline. This…
DeltaV-Seal™ performs under extreme marine conditions
Importing ship-to-shore Liquefied Natural Gas (LNG) requires robust and efficient pipeline seals that are compliant with high environmental standards. The thermal cycling caused by the cryogenic…
DeltaV-Seal™ reduces greenhouse emissions
In fertilizer production, high-quality phosphorus fertilizers require nitric acid as a key ingredient, which is usually synthesized via the Ostwald process on-site (oxidizing of ammonia before…
Pipeotech, featured in Sealing Technology & World Pumps
Following extensive leakage testing, carried out under cryogenic conditions in a laboratory programme, Pipeotech has extended coverage all the way down to applications running at a temperature of…
Valve World features DeltaV-Seal™
In July 2021, one of the sealing industry's most widely circulated publications, Valve World, featured Pipeotech CTO Jan Oredsson inspecting a DeltaV-Seal gasket on its front cover, hailing Pipeotech…
Andrew Patrick takes over as Pipeotech interim CEO
Pipeotech has appointed Andrew Patrick as the company’s interim chief executive following the resignation of outgoing CEO Henrik Sollie. Patrick steps into the interim role from his current position…
In conversation with: Odd Skagestad, GE Healthcare Lindesnes
We recently spent some time talking with technical engineer Odd Skagestad from GE Healthcare Lindesnes about how DeltaV-Seal™ technology has impacted operations at a world-leading pharmaceutical…
Cryogenic milestone for DeltaV-Seal™
Pipeotech gasket, DeltaV-Seal™ is engineered for long term use, all the way down to applications running at -196°C, based on stellar results of cryogenic leakage tests at a pre-eminent European…
DeltaV-Seal™ - The end to fugitive emissions?
At Pipeotech we believe that the concept of 'acceptable leakage' is unacceptable and that flange-born fugitive emissions are an avoidable threat. As part of our mission to spread this message it was…
Pipeotech lands big game prize with Safari partnership deal
Pipeotech has signed a key partnership deal with leading Saudi Arabian pipeline products and services supplier Safari Oil & Gas Company Ltd. (SOG) to deliver the Norwegian innovator’s guaranteed…
Esinsa - A seamless match in the Iberian market
Pipeotech has secured a partnership agreement with Spanish industrial supplier Esinsa that will provide a springboard to expand its deliveries of the ground-breaking DeltaV-Seal™ gasket to a…
Pipeotech’s reach goes atomic
Pipeotech has taken gasket tightness to new microscopic levels by supplying DeltaV-Seal™ to European Spallation Source, the world’s most powerful neutron source, in Lund, Sweden. The new research…
Corrosion and integrity specialist Jan Oredsson joins Pipeotech
Pipeotech has sealed the deal on an exciting new addition to its team by bringing in internationally recognized pipeline integrity and corrosion expert Jan Oredsson.Oredsson has extensive experience…
VARD finds the perfect fit
Norwegian-based shipbuilder VARD has been installing Pipeotech’s DeltaV-Seal™ in its vessels since 2016 and the cost-saving benefits have been very clear to Johny Morland, Principal Engineer, QA and…
Pipeotech recruits Andrew J. Patrick as new Head of Business Development
Pipeotech is looking to “supercharge” its global growth with the recruitment of Andrew Patrick to the new role of Head of Business Development. Patrick, previously EVP Global Sales at Clock Spring…
Pipeotech present at Oslo Innovation Week 2020
On Tuesday 22nd September 2020, Pipeotech took part in an Oslo Innovation Week live stream event in association with Energy Valley - showcasing our DeltaV-Seal™ technology and telling the world about…
Pipeotech Covid-19 update - July 2020
As the global pandemic continues, the health and safety of our customers, employees, partners, and suppliers continue to be paramount. While Norway has opened up domestically, Pipeotech appreciates…
Pipeotech joins the European Sealing Association
Pipeotech is pleased to announce that it has become a member of the European Sealing Association.Established in 1992 as a non-profit making trade association, The European Sealing Association…
Pipeotech allies with PM International Suppliers, LLC in North America
Pipeotech has reached a close cooperation agreement with Florida-based firm PM International Suppliers LLC to help introduce DeltaV-Seal™ gasket technology to the North American market.
Pipeotech and CT4 announce strategic partnership
Pipeotech is pleased to announce that the completion of successful partnership negotiations between Pipeotech and Brazilian technology specialists CT4 (Centro de Tecnologia 4.0 LLC). Effective…
Corrosive influence - The dangers of galvanic corrosion for pipelines
Prevention is always better than a cure. Avoiding issues in the first place, rather than attending to them once they’ve occurred, is plain common sense. So why do so many industrial facilities…
To boldly go... Pipeotech joins the Innovation Norway, Explorer
We’re pleased to announce that at the beginning of 2020, Pipeotech joined the ranks of one of Norwegian Industry’s most exclusive clubs, The Explorer. Opened by Norwegian Prime Minister Erna Solberg…
Pipeotech gears up for global DeltaV-Seal™ growth with Barter and Næss
Pipeotech has made two senior additions to its team as it looks to create awareness of its revolutionary, 100% leak-proof DeltaV-Seal and meet growing demand across a broad range of global…
Pipeline safety – How gasket choices can mitigate health and safety risks
Nothing is as important as health and safety when it comes to industrial facilities. However, a critical component in piping systems is often overlooked, viewed as a consumable rather than a key to…
Stopping expensive leakages at historic brewing facility
With the title of ‘the oldest brewery in Norway’, the Aass brewery is about as close as it gets to being a Norwegian institution. Situated on the banks of the river in the busy port city of Drammen…
Pipeotech recruits Ribler and targets global growth for unique DeltaV-Seal™
Pipeotech, the manufacturer of the world’s first type approved, 100% leak-proof seal, has appointed Jarle Ribler, previously of Otto Olsen AS and Aker Engineering, to head its sales function. Ribler…
From subsea to life on land - gasket technology follows Darwinism
As featured by Yahoo Finance news via Cision PRNewswireMetal-to-metal sealing technology is a technique that had previously been reserved for subsea oil and gas applications where meeting the most…
The seal of integrity (a feature article written by Industry Networker Magazine)
In a recent article published by Industry Networker Magazine, Pipeotech and theDeltaV-Seal™ are recognized for significant technological enhancements towards safety, efficiency, cost reduction, and…
DeltaV-Seal™ replaces kammprofile gaskets at critical distribution facility
After a long relationship utilizing kammprofile gasket technology, Norwegian LPG distributor PrimaGaz Norge AS has decided to abandon the old kammprofile gasket design in favor of the new DeltaV-Seal…
Flare tip leakage is too hot to handle for the competition
Alba Gaskets is called upon to provide a solution for Flare Tip flange leak A North Sea Operator came to Alba Gaskets with a problem affecting a Flare line on their platform, which had been…
Exceeding gas-tight sealing strengths and eliminating ATEX zones
Gaskets seals are generally the consumables often selected at the last moment in a design project and carry few expectations. Although viewed as less significant, this consumable can have the most…
Intergas exclusively use DeltaV-Seal™
Following a highly successful test period, Intergas AS has announced that the DeltaV-Seal has been named as their exclusive seal of choice for all current and future liquefied natural gas operations.…
