Pipeotech has taken gasket tightness to new microscopic levels by supplying DeltaV-Seal to European Spallation Source, the world’s most powerful neutron source, in Lund, Sweden.
The new research facility is one of the largest and most advanced technology infrastructure projects being built anywhere in the world today and it will enable a more powerful range of experiments using neutrons than previously possible, providing a significant step forward in the science of everyday life.
Advanced research requires advanced tools and Pipeotech’s unique DeltaV-Seal will play an important role in this exciting new development.
When producing neutrons for research in a spallation process, ionising radiation is generated. For this reason, safety is always the top priority at ESS, and first and foremost is to meet all the requirements and safety regulations set out by the regulatory authorities.
The incredible guaranteed tightness and durability of the DeltaV-Seal are vital components in the safe and efficient running of the key water-cooling system in the ESS target area, where the water will become activated in the neutron production process.
Ionising radiation can cause a high attrition rate in polymeric seals and the fact Pipeotech’s gasket can be made in the same stainless steel material as its surroundings negate the problems of galvanic corrosion in such a sensitive environment.
Neutrons have been used in scientific studies since the 1930s as they can penetrate deeper than X-rays and can be used to analyse different structures and functions within a material at an atomic or molecular level in a ‘soft’ way, meaning samples are not altered or damaged.
This opens the door to a wide range of study areas, including in the fields of life sciences, materials science, experimental physics, nano-technology, cultural heritage and pharmaceuticals.
Funding of the new multi-disciplinary research facility ESS is provided by 13 member countries organised as a European Research Infrastructure Consortium, with Sweden hosting the facility and Denmark the data management centre, which is located in Copenhagen.
Hundreds of scientists from across Europe have been working in collaboration on the concept and design of the new facility. Building work in Lund began in 2014 and when the research facility starts operating in 2023 it will deliver 20 times more sensitive instrument performance on average than the current leading neutron sources.
Around two to three thousand guest scientists and researchers will carry out experiments each year using this powerful new tool to analyse basic atomic structures and forces, leading to many potential break-through discoveries.
ESS in Lund will be the world’s brightest neutron source, and is based on the most powerful linear proton accelerator ever built.
The process to generate neutrons at ESS starts in the accelerator’s ion source, where rapidly varying electromagnetic fields heat hydrogen gas to ‘boil off’ the electrons from the hydrogen molecules. Hydrogen is the simplest element of nature and consists only of protons and electrons, so when the electrons have evaporated a plasma of protons remains.
The protons are guided from the ion source into a series of various types of accelerator cavities, using magnets to steer the beam. The protons are accelerated to about 96% the speed of light using electromagnetic fields as they are directed through the 602.5-metre accelerator towards their target.
That target is a 4.9-tonne, 2.6-metre diameter rotating wheel made of 7,000 neutron-rich heavy metal tungsten bricks encased in stainless steel shielding. The high-speed protons collide with the tungsten and split the nuclei, kicking out high-energy neutrons in the process known as spallation.
Those neutrons are then slowed to the speed of sound and guided through a fan of up to 42 beam ports towards a range of 15 tailor-made instruments, where the samples to be studied are placed for analysis.
When the heat is on
The target area inside the monolith, which contains almost 6,000 tonnes of shielding, poses some serious engineering challenges as ionising radiation and large amounts of heat are produced when the protons collide with the wheel and split the tungsten nuclei.
The tungsten target itself is cooled using a flowing helium gas system to keep it below 500 degrees Celsius, but the stainless steel shielding and the surrounding components and instruments are also affected by heat and are required to be water-cooled at between room temperature and 60 degrees Celsius.
The intention is for neutron production to run 24/7 for about 5,400 hours a year at the facility and so any unscheduled maintenance will cause significant disruption for the researchers.
It is therefore essential that the pipes carrying the water-cooling system are leak-proof and resistant, so the seals employed must display stay maintenance free for as long as possible
The safety and verification requirements are set out by the regulatory body, the Swedish Radiation Safety Authority, and the components and materials used at ESS have to comply with these requirements in order for the facility to get the license to operate.
It is important for ESS to have a seal delivered that already has been tested so rigorously and comes as type-approved with verification from classification society DNV GL.
ESS sources its seals indirectly through a supplier and has chosen Pipeotech’s DeltaV-Seal for the water-cooling system in the most challenging area for gaskets in the whole facility.
Extreme tightness, reliability and durability are all key factors in why the ESS has chosen DeltaV-Seal. Leaks are simply not acceptable in this environment.
For more information about European Spallation Source please visit https://europeanspallationsource.se
More from News
Cryogenic milestone for DeltaV-Seal™
Pipeotech extends it's industry-first 10-year gas-tight warranty for the ground-breaking DeltaV-Seal™ gasket all the way down to applications running at -196°C, based on stellar results of cryogenic…
DeltaV-Seal - The End to Fugitive Emissions?
At Pipeotech we believe that the concept of 'acceptable leakage' is unacceptable and that flange-born fugitive emissions are an avoidable threat. As part of our mission to spread this message it was…
Pipeotech Lands Big Game Prize with Safari Partnership Deal
Pipeotech has signed a key partnership deal with leading Saudi Arabian pipeline products and services supplier Safari Oil & Gas Company Ltd. (SOG) to deliver the Norwegian innovator’s guaranteed…
Esinsa - A Seamless Match in the Iberian Market
Pipeotech has secured a partnership agreement with Spanish industrial supplier Esinsa that will provide a springboard to expand its deliveries of the ground-breaking DeltaV-Seal gasket to a…
Corrosion and integrity specialist Jan Oredsson joins Pipeotech
Pipeotech has sealed the deal on an exciting new addition to its team by bringing in internationally recognized pipeline integrity and corrosion expert Jan Oredsson.Oredsson has extensive experience…
Pipeotech recruits Andrew J. Patrick as new Head of Business Development
Pipeotech is looking to “supercharge” its global growth with the recruitment of Andrew Patrick to the new role of Head of Business Development. Patrick, previously EVP Global Sales at Clock Spring…
Pipeotech present at Oslo Innovation Week 2020
On Tuesday 22nd September 2020, Pipeotech took part in an Oslo Innovation Week live stream event in association with Energy Valley - showcasing our DeltaV-Seal™ technology and telling the world about…
DeltaV-Seal 10-year gas-tight warranty launched
Norway’s Pipeotech has signaled its intention to rewrite the rulebook within the pipe sealing segment by offering a 10-year gas-tight guarantee as standard on its innovative DeltaV-Seal. The move…
Pipeotech Covid-19 Update - July 2020
As the global pandemic continues, the health and safety of our customers, employees, partners, and suppliers continue to be paramount. While Norway has opened up domestically, Pipeotech appreciates…
Pipeotech Joins the European Sealing Association
Pipeotech is pleased to announce that it has become a member of the European Sealing Association.Established in 1992 as a non-profit making trade association, The European Sealing Association…
Pipeotech Allies with PM International Suppliers, LLC in North America
Pipeotech has reached a close cooperation agreement with Florida-based firm PM International Suppliers LLC to help introduce DeltaV-Seal gasket technology to the North American market.
Pipeotech and CT4 Announce Strategic Partnership
Pipeotech is pleased to announce that the completion of successful partnership negotiations between Pipeotech and Brazilian technology specialists CT4 (Centro de Tecnologia 4.0 LLC). Effective…
To Boldly Go... Pipeotech Joins the Innovation Norway Explorer
We’re pleased to announce that at the beginning of 2020, Pipeotech joined the ranks of one of Norwegian Industry’s most exclusive clubs, The Explorer. Opened by Norwegian Prime Minister Erna Solberg…
Pipeotech gears up for global DeltaV-Seal growth with Barter and Næss
Pipeotech has made two senior additions to its team as it looks to create awareness of its revolutionary, 100% leak-proof DeltaV-Seal and meet growing demand across a broad range of global…
Pipeotech recruits Ribler and targets global growth for unique DeltaV-Seal
Pipeotech, the manufacturer of the world’s first type approved, 100% leak-proof seal, has appointed Jarle Ribler, previously of Otto Olsen AS and Aker Engineering, to head its sales function. Ribler…
From subsea to life on land - gasket technology follows Darwinism
As featured by Yahoo Finance news via Cision PRNewswireMetal-to-metal sealing technology is a technique that had previously been reserved for subsea oil and gas applications where meeting the most…
The Seal of Integrity (a feature article written by Industry Networker Magazine)
In a recent article published by Industry Networker Magazine, Pipeotech and the DeltaV-Seal are recognized for significant technological enhancements towards safety, efficiency, cost reduction, and…